Example sentences of "[adv] [be] set to " in BNC.
Next pageNo | Sentence |
---|---|
1 | Some of the keynames ( like Beep ) can only be set to one of two values , so Beep=yes means that Windows will beep every time there 's an error . |
2 | Rate switches will normally be set to the ‘ high ’ position , with the gyro sensitivity on the ‘ low ’ setting . |
3 | Normally is set to a preset level and the voltmeter V is calibrated to give Q directly , from which the loss resistance R of the inductor can be calculated if required . |
4 | The workhouse — institutional rather than ‘ outdoor ’ relief — was one way of controlling the help given to paupers ; but demands that such institutions should pay for themselves had a hollow ring to it — many of the inmates were there because their skills were not needed in declining industries , so they could hardly be set to work profitably once they were taken within its walls . |
5 | Some words are already almost music : Shakespeare 's words are already so musical that they can hardly be set to music . |
6 | On the YC-6 , the yarn brake and the colour changer arm must both be set to the double bed position . |
7 | Firstly , the TM262 has four heads and 615 cylinders and the Reduced Write Current and Write Precomp should both be set to cylinder 615 , if your low-level format program wants to know . |
8 | If you are only interested in autorotation as a means of saving the model in the event of an engine failure , the pitch can simply be set to the manufacturer 's recommended figure ( or , if in doubt , -2½° ) . |