Example sentences of "then turn [adv] [art] " in BNC.

  Next page
No Sentence
1 Lay the blind out flat with wrong side uppermost and form the lath channel by turning 1cm ( ⅜in ) up to the wrong side along the bottom edge , then turn up a further 4cm ( 1 ½in ) .
2 Smooth the lining out flat again , then turn in the sides of the lining and pin it to the curtains , leaving a 2.5cm ( 1in ) margin of curtain fabric showing at each side .
3 Then turn off the heat and ‘ rest ’ the joint in the oven with the door ajar for 25–30 minutes .
4 Then turn off the heat and ‘ rest ’ the joint in the oven with the door ajar for 25–30 minutes .
5 Then turn off the stop tap on the supply to the feed-and-expansion tank , attach a hose to the lowest draincock on the system , and lead it to a gully or drain outside .
6 Then turn off the water supply for the feed-and-expansion tank , drain the system , and disconnect and remove the radiator and its brackets as described earlier ( see REPLACING A RADIATOR ) .
7 Then turn off the power to the circuit concerned so you can safely inspect socket A's wiring .
8 With the new fitting connected up and mounted , run the rest of the wiring along your selected route to the point at which it will be connected to an existing circuit , then turn off the power and make the final connections .
  Next page