Example sentences of "be set to the " in BNC.

  Next page
No Sentence
1 The rotary input gain control can be set to the optimum level so that the overload light flashes momentarily on for the loudest peaks of signal .
2 If you are only interested in autorotation as a means of saving the model in the event of an engine failure , the pitch can simply be set to the manufacturer 's recommended figure ( or , if in doubt , -2½° ) .
3 The object here is to make the model fly as smoothly as possible and , ideally , the control movements should be set to the absolute minimum , while the gyro gain should be as high as possible .
4 Rate switches will normally be set to the ‘ high ’ position , with the gyro sensitivity on the ‘ low ’ setting .
5 Features include : Stopwatch — from th sec to 9 hrs 59 min 59.99 secs. 30 lap memory , countdown alarm that may be set to the second , pre-set split times for accurate analysis of race pace .
6 The holding lever(s) should be set to the knit position .
7 On the YC-6 , the yarn brake and the colour changer arm must both be set to the double bed position .
8 In this way , legislative bounds can be set to the common law principle , as Mr. Glick insists that they should .
9 This also makes our text much easier to align as everything will be set to the same leading .
10 When phrases of the text are repeated or thrown from voice to voice , they may or may not be set to the same or similar melodic phrase ; imitation is free and texturally loose ; metrical symmetry is at a discount .
11 From this information the design limits for any manufactured item can be set to the economic optimum .
12 From this information the design limits for any manufactured item can be set to the economic optimum .
  Next page