Example sentences of "use [art] [noun sg] level " in BNC.
Next pageNo | Sentence |
---|---|
1 | As our ‘ freezing point ’ , we 've used a base level IBM AT compatible with a clock speed of 8MHz , a 20MB MFM hard drive and a basic VGA graphics card . |
2 | ‘ You should have used a spirit level . ’ |
3 | Using a spirit level check that each course is level and the wall is vertical . |
4 | The hinge itself must also be horizontal , using a spirit level . |
5 | Before drilling , hold the mirror up against the wall and mark the position of where the holes will be ( using a spirit level to make sure it 's horizontal ) . |
6 | Simply line up the shelf in position , using a spirit level , before permanent fixing for a really professional result . |
7 | You will also need a plumbline to ensure that a frame or end panel is vertical ; this is more accurate and easier to see than using a spirit level . |
8 | Simply line up the shelf in position , using a spirit level , before permanent fixing for a really professional result . |
9 | Fig. 1 ( c ) Short wooden pegs are inserted 90–120 cm ( 3–4 ft ) apart around the pool and the tops levelled using a spirit level . |
10 | The poles must be set vertically ( use a spirit level ) . |
11 | Use a spirit level to ensure that the glazed sheet is horizontal before fixing it to the barge board with stainless steel screws 300mm apart . |
12 | Offer up the decorative trellis panels ( concave and convex arches are available , as well as rectangular sections ) and use a spirit level to ensure they are horizontal and approximately 2in above the top of the fence . |
13 | Use a spirit level to ensure the moulding is horizontal , then pencil a line along the top of the moulding . |
14 | The positioning of the fixed slips is the vital point — use a spirit level to make sure the bottom of the mirror is absolutely horizontal . |
15 | Loosely secure the strip , then use a spirit level to ensure the strip is vertical before marking for other fixing holes |
16 | Use a spirit level and gauge board to lay the pipe at the correct angle |